2022 (13 SCI & 24 SCOPUS) (Q1: 4, Q2: 17, Q3: 1, Q4: 1)

99. Kalita, K., Burande, D., Ghadai, R.K., & Chakraborty, S. (2022). Finite Element Modelling, Predictive Modelling and Optimization of Metal Inert Gas, Tungsten Inert Gas and Friction Stir Welding Processes: A Comprehensive Review. Archives of Computational Methods in Engineering. Springer. DOI: Just accepted, In press *Impact Factor: 7.302* [SCOPUS] *Q1* [SCI]

98. Kalita, K., Haldar, S., & Chakraborty, S. (2022). A comprehensive review on high-fidelity and metamodel-based optimization of composite laminates. Archives of Computational Methods in Engineering. Springer. DOI: 10.1007/s11831-021-09699-z *Impact Factor: 7.302* [SCOPUS] *Q1* [SCI]

97. Das, J., Kalita, K., & Roychowdhury, A. (2022). Symbolic Regression Metamodel-based Optimal Design of Patient-Specific Spinal Implant (Pedicle Screw Fixation). Engineering with Computers, 38(2), 999-1014. Springer. DOI:10.1007/s00366-020-01090-z *Impact Factor: 7.963* [SCOPUS] *Q1* [SCI]

96. Rajesh, P.V., Kalita, K., & Gao, X.Z. (2022). Process Modelling and Experimental Analysis of Optimal Specimen Selection in Organic CMCs. Computers, Materials & Continua, 70(2), 405, 2415-2433. Tech Science Press. DOI: 10.32604/cmc.2022.018247 *Impact Factor: 3.772* [SCOPUS] *Q1* [SCI]

95. Kalita, K., & Ghadai R.K. (2022). Optimization of Plasma Enhanced Chemical Vapor Deposition Process Parameters for Hardness Improvement of DLC Coatings. Scientia Iranica. Sharif University of Technology. DOI:10.24200/SCI.2022.56869.4952 *Impact Factor: 1.435* [SCOPUS] *Q2* [SCI]

94. Kalita, K., Ghadai, R.K., & Chakraborty, S. (2022). Parametric Optimization of CVD Process for DLC Thin-Film Coatings: A Comparative Analysis. Sādhanā. Springer. DOI: 10.1007/s12046-022-01842-1 *Impact Factor: 1.118* [SCOPUS] *Q2* [SCI]

93. Joshi, M., Kalita, K., Jangir, P., Ahmadianfar, I., & Chakraborty, S. (2022). A Conceptual Comparison of Dragonfly Algorithm Variants for CEC-2021 Global Optimization Problems. Arabian Journal for Science and Engineering. Springer. DOI:10.1007/s13369-022-06880-9 *Impact Factor: 2.334* [SCOPUS] *Q2* [SCI]

92. Shanmugasundar, G., Fegade, V., Mahdal, M., Kalita, K. (2022). Optimization of Variable Stiffness Joint in Robot Manipulator using a novel NSWOA-MARCOS Approach. Processes, 10(6), 1074. MDPI. DOI: 10.3390/pr10061074 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

91. Shanmugasundar, G., Sapkota, G., Čep, R., Kalita, K. (2022). Application of MEREC in Multicriteria Selection of Optimal Spray-Painting Robot. Processes, 10(6), 1172. MDPI. DOI: 10.3390/pr10061172 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

90. Gayathri R., Rani S.U., Cepova L., Rajesh M., Kalita, K. (2022). A Comparative Analysis of Machine Learning Models in Prediction of Mortar Compressive Strength, Processes, 10(7), 1387. MDPI. DOI: 10.3390/pr10071387 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

89. Shankar, R., Ganesh, N., Čep, R., Narayanan, R.C., Pal, S., & Kalita, K. (2022). Hybridized Particle Swarm - Gravitational Search Algorithm for Process Optimization. Processes, 10(3), 616. MDPI. DOI: 10.3390/pr10030616 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

88. Rajesh, P.V., Gupta, K.K., Čep, R., Ramachandran, M., Kouřil, K., & Kalita, K. (2022). Optimizing Friction Stir Welding of dissimilar grades of Aluminum alloy using WASPAS. Materials, 15(5), 1715. MDPI. DOI:10.3390/ma15051715 *Impact Factor: 3.623*[SCOPUS] *Q2* [SCI]

87. Shankar, R., Ganesh, N., Čep, R., Narayanan, R.C., Pal, S., & Kalita, K. (2022). A Conceptual Comparison of Six Nature-Inspired Metaheuristic Algorithms in Process Optimization. Processes, 10(2), 197. MDPI. DOI: 10.3390/pr10020197 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

86. Kalita, K., Chakraborty, S. (2022). CoCoSo-based multi-attribute process parameter optimization of cryogenic drilling on Multi-Walled CarbonNanoTubes reinforced composites. International Journal on Interactive Design and Manufacturing. Springer. DOI:10.1007/s12008-022-00894-1 [ESCI] [SCOPUS] *Q2*

85. Kalita, K., Ghadai, R.K., Chakraborty, S. (2022). A Comparative Study on Multi-objective Pareto Optimization of WEDM Process using Nature-inspired Metaheuristic Algorithms. International Journal on Interactive Design and Manufacturing. Springer. DOI: Just accepted, In press [ESCI] [SCOPUS] *Q2*

84. Kalita, K., Pal, S., Haldar, S., & Chakraborty, S. (2022). A Hybrid TOPSIS-PR-GWO Approach for Multi-objective Process Parameter Optimization. Process Integration and Optimization for Sustainability, 1-16. Springer. DOI:10.1007/s41660-022-00256-0 [ESCI] [SCOPUS] *Q2*

83. Dey, K., Kalita, K., Chakraborty, S. (2022). A Comparative Analysis on Metamodel-based Predictive Modeling of Electrical Discharge Machining Processes. International Journal on Interactive Design and Manufacturing. Springer. DOI: 10.1007/s12008-022-00939-5 [ESCI] [SCOPUS] *Q2*

82. Mandal K., Kalita, K., Chakraborty, S. (2022). Gene Expression Programming for Parametric Optimization of an Electrochemical Machining Process. International Journal on Interactive Design and Manufacturing. Springer. DOI:Just accepted, In press [ESCI] [SCOPUS] *Q2*

81. Dey, K., Kalita, K., Chakraborty, S. (2022). Prediction Performance Analysis of Neural Network Models for an Electrical Discharge Turning Process. International Journal on Interactive Design and Manufacturing. Springer. DOI:Just accepted, In press [ESCI] [SCOPUS] *Q2*

80. Ghadai, R.K., Kalita, K., Madhu S., Ramachandran, M., Chakraborty, S. (2022). Experimental Investigation and Parametric Optimization of a Milling Process using Multi-criteria Decision-Making Methods: A Comparative Analysis. International Journal on Interactive Design and Manufacturing. Springer. DOI: 10.1007/s12008-022-00973-3 [ESCI] [SCOPUS] *Q2*

79. Pal, S., Kalita, K., & Haldar S. (2022). Genetic Algorithm-based Fundamental Frequency Optimization of Laminated Composite Shells Carrying Distributed Mass. Journal of The Institution of Engineers (India): Series C. Springer. DOI: 10.1007/s40032-021-00801-9. [SCOPUS] *Q2*

78. Kalita, K., Chakraborty, S., Ghadai, R.K., Chakraborty S. (2022). Parametric Optimization of Non-traditional Machining Processes using Multi-criteria Decision-Making Techniques - Literature Review and Future Directions. Multiscale and Multidisciplinary Modeling, Experiments and Design. Springer. DOI: Just accepted, In press [ESCI] [SCOPUS] *Q3*

77. Kalita, K., Ghadai, R.K., & Bansod, A. (2022). Sensitivity Analysis of GFRP Composite Drilling parameters and Genetic Algorithm Based Optimization. International Journal of Applied Metaheuristic Computing, 13(1), 1-17. IGI-global. DOI: 10.4018/IJAMC.290539 [ESCI] [SCOPUS] *Q4*

76. Burande, D.V., Kalita, K., Bansod, A., & Dhar E. (2022). Transient numerical simulation of a butt weld joint for optimization of process parameters. AIP Conference Proceedings, 2393(1), 20038. DOI: 10.1063/5.0074965 [ESCI][SCOPUS]

2021 (16 SCI & 17 SCOPUS) (Q1: 2, Q2: 13, Q3: 2)

75. Kalita, K., Ghadai, R.K., & Gao, X.Z. (2021). A comparative study on the metaheuristic-based optimization of skew composite laminates. Engineering with Computers. Springer. DOI:10.1007/s00366-021-01401-y *Impact Factor: 7.963* [SCOPUS] *Q1* [SCI]

74. Vikram, K., Ragavendran, U., Kalita, K., Ghadai, R.K., & Gao, X.Z. (2021). Hybrid Metamodel-NSGA-III-EDAS Based Optimal Design of Thin Film Coatings. Computers, Materials & Continua, 66(2), 1771-1784. Tech Science Press. DOI:10.32604/cmc.2020.013946 *Impact Factor: 3.772* [SCOPUS] *Q1* [SCI]

73. Kalita, K., Shinde, D., & Chakraborty, S. (2021). Grey Wolf Optimizer-based Design of Ventilated Brake Disc. Brazilian Society of Mechanical Sciences and Engineering, 43, 405. Springer. DOI: 10.1007/s40430-021-03125-y *Impact Factor: 2.220* [SCOPUS] *Q2* [SCI]

72. Kalita, K., Chakraborty, S., Madhu, S., Ramachandran, M., & Gao, X.Z. (2021). Performance Analysis of Radial Basis Function Metamodels for Predictive Modelling of Laminated Composites. Materials, 14(12), 3306. MDPI. DOI:10.3390/ma14123306 *Impact Factor: 3.623*[SCOPUS] *Q2* [SCI]

71. Bhattacharya, S., Kalita, K., Čep, R., & Chakraborty, S. (2021). A Comparative Analysis on Prediction Performance of Regression Models during Machining of Composite Materials. Materials, 14(21), 6689. MDPI. DOI: 10.3390/ma14216689 *Impact Factor: 3.623*[SCOPUS] *Q2* [SCI]

70. Kumar, V., Kalita, K., Chatterjee, P., Zavadskas, E.K., & Chakraborty, S. (2021). A SWARA-CoCoSo-Based Approach for Spray Painting Robot Selection. Informatica. DOI: 15388/21-infor466 *Impact Factor: 2.688* [SCOPUS] *Q2* [SCI]

69. Shivakoti, I., Kalita, K., Kibria, G., Sharma, A., Pradhan, B.B., & Ghadai, R.K. (2021). Parametric Analysis and Multi Response Optimization of Laser Surface Texturing of Titanium Super Alloy. Brazilian Society of Mechanical Sciences and Engineering, 43, 400. Springer. DOI:10.1007/s40430-021-03115-0 *Impact Factor: 2.220* [SCOPUS] *Q2* [SCI]

68. Gupta, K.K., Kalita, K., Ghadai, R.K., Ramachandran, M., & Gao, X.Z. (2021). Machine Learning-Based Predictive Modelling of Biodiesel Production-A Comparative Perspective. Energies,14(4), 1122. MDPI. DOI:10.3390/en14041122 *Impact Factor: 3.004* [SCOPUS] *Q2* [SCI]

67. Kumar, V., Kalita, K., Madhu, S., Ragavendran, U., & Gao, X.Z. (2021). A Hybrid Genetic Programming-Grey Wolf Optimizer approach for Process Optimization of Biodiesel Production. Processes, 9(3), 442. MDPI. DOI:10.3390/pr9030442 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

66. Shinde, D., Öktem, H., Kalita, K., Chakraborty, S., & Gao, X.Z. (2021). Optimization of Process Parameters for Friction Materials using Multi-Criteria Decision Making: A Comparative Analysis. Processes, 9(9), 1570. MDPI. DOI: 10.3390/pr9091570 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

65. Ghadai, R.K., Das, S., Kalita, K., Shivakoti, I., Mondal, S.C., & Swain, B.P. (2021). Effect of nitrogen (N2) flow rate over the tribological, structural and mechanical properties of diamond-like carbon (DLC) thin film. Materials Chemistry and Physics, 260, 124082. Elsevier. DOI:10.1016/j.matchemphys.2020.124082 *Impact Factor: 4.094* [SCOPUS] *Q2* [SCI]

64. Joshi, M., Ghadai, R.K., Madhu, S., Kalita, K., & Gao, X.Z. (2021). Comparison of NSGA-II, MOALO and MODA for Multi-Objective Optimization of Micro-Machining Processes. Materials, 14(17), 5109. MDPI. DOI: 10.3390/ma14175109 *Impact Factor: 3.623* [SCOPUS] *Q2* [SCI]

63. Ganesh, N., Jain, P., Choudhury, A., Dutta, P., Kalita, K., & Barsocchi, P. (2021). Random Forest Regression-based Machine Learning Model for Accurate Estimation of Fluid Flow in Curved Pipes. Processes, 9(11), 2095. MDPI. DOI: 10.3390/pr9112095 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

62. Shanmugasundar, G., Vanitha, M., Čep, R., Kumar, V., Kalita, K., & Ramachandran, M. (2021). A Comparative Study of Linear, Random Forest and AdaBoost Regressions for Modeling Non-Traditional Machining. Processes, 9(11), 2015. MDPI. DOI: 10.3390/pr9112015 *Impact Factor: 2.847* [SCOPUS] *Q2* [SCI]

61. Ganesh, N., Ragavendran, U., Kalita, K., Jain, P., & Gao X.Z. (2021). Multi-Objective High-Fidelity Optimization Using NSGA-III and MO-RPSOLC. Computer Modeling in Engineering and Sciences, 129(2), 443-464. DOI: 10.32604/cmes.2021.014960 *Impact Factor: 1.593*[SCOPUS] *Q3* [SCI]

60. Ghadai, R.K., Das, S., Kalita, K., Swain, B.P., & Davim, J.P. (2021). Structural and Mechanical Analysis of APCVD Deposited Diamond-like Carbon Thin Films. Silicon, 13, 4453-4462. Springer. DOI:10.1007/s12633-020-00760-3 *Impact Factor: 2.670* [SCOPUS] *Q3* [SCI]

59. Maheshwari, N., Choudhary, J., Rath, A., Shinde, D., & Kalita, K. (2021). Finite Element Analysis & Multi-criteria Decision Making (MCDM)-based Optimal Design Parameter Selection of Solid Ventilated Brake Disc. Journal of The Institution of Engineers (India): Series C. Springer. DOI: 10.1007/s40032-020-00650-y [SCOPUS] *Q2*

2020 (10 SCI & 14 SCOPUS) (Q1: 4, Q2: 3, Q3: 5)

58. Kalita, K., Dey, P., Haldar, S., & Gao, X.Z. (2020). Optimizing Frequencies of Skew Composite Laminates with Metaheuristic Algorithms. Engineering with Computers, 36(2), 741-761. Springer. DOI:10.1007/s00366-019-00728-x *Impact Factor: 7.963* [SCOPUS] *Q1* [SCI]

57. Kalita, K., Mukhopadhyay, T., Dey, P., & Haldar, S. (2020). Genetic programming assisted multi-scale optimization for multi-objective dynamic performance of laminated composites: The advantage of a more elementary-level analysis. Neural Computing and Applications, 32(12), 7969-7993. Springer. DOI:10.1007/s00521-019-04280-z *Impact Factor: 5.606* [SCOPUS] *Q1* [SCI]

56. Phipon, R., Shivakoti, I., Kalita, K., Kibria, G., Sharma, A., & Ghadai, R.K. (2020). Laser beam micro engraving on Silicon Carbide. Materials and Manufacturing Processes, 35(12), 1372-1382.Taylor & Francis. DOI:10.1080/10426914.2020.1772490 *Impact Factor: 4.616* [SCOPUS] *Q1* [SCI]

55. Ganesh, N., Dutta, P., Ramachandran, M., Bhoi, A. K., & Kalita, K. (2020). Robust Metamodels for Accurate Quantitative Estimation of Turbulent Flow in Pipe Bends. Engineering with Computers, 36(3), 1041-1058. Springer. DOI:10.1007/s00366-019-00748-7 *Impact Factor: 7.963* [SCOPUS] *Q1* [SCI]

54. Kalita, K., Ghadai, R.K., Cepova, L., Shivakoti, I., & Bhoi, A.K. (2020). Memetic Cuckoo-Search-Based Optimization in Machining Galvanized Iron. Materials, 13(4), 3047. MDPI. DOI:10.3390/ma13143047 *Impact Factor: 3.623* [SCOPUS] *Q2* [SCI]

53. Singh, A., Ghadai, R.K., Kalita, K., Chatterjee, P., & Pamučar, D. (2020). EDM Process Parameter Optimization for Efficient Machining of Inconel-718. Facta Universitatis, Series: Mechanical Engineering, 18(3), 473-490. DOI:10.22190/FUME200406035S *Impact Factor: 3.324* [SCOPUS] *Q2* [SCI]

52. Ghadai, R.K. & Kalita, K. (2020). Accurate estimation of DLC thin film hardness using genetic programming. International Journal of Materials Research, 111(2), 453-462. DOI:10.3139/146.111911 *Impact Factor: 0.748* [SCOPUS] *Q3* [SCI]

51. Pal, S., Haldar, S., & Kalita, K. (2020). Dynamic Analysis of Plates with Cut-Out Carrying Concentrated and Distributed Mass. RINA Transactions Part A, International Journal of Maritime Engineering, 162 (A3), 263-275. DOI:10.3940/rina.ijme.2020.a3.612 *Impact Factor: 0.521* [SCOPUS] *Q3* [SCI]

50. Bansod, A., Patil, A.P., Kalita, K., Deshmukh, B.D., & Khobragade, N. (2020). Fuzzy Multicriteria Decision-Making-based Optimal Zn-Al Alloy Selection in Corrosive Environment. International Journal of Materials Research, 111(11), 953-963. DOI:10.3139/146.111957 *Impact Factor: 0.748* [SCOPUS] *Q3* [SCI]

49. Ganesh, N., Ghadai, R.K., Bhoi, A.K., Kalita, K., & Gao, X.Z. (2020). An Intelligent Predictive Model-based Multi-Response Optimization of EDM Process. Computer Modeling in Engineering and Sciences, 124 (2), 459-476. Tech Science Press. DOI:10.32604/cmes.2020.09645 *Impact Factor: 1.593* [SCOPUS] *Q3* [SCI] 

48. Ghadai, R.K., Kalita, K., & Gao, X.Z. (2020). Symbolic Regression Metamodel Based Multi-Response Optimization of EDM Process. FME Transactions, 48(2), 404-410. DOI:10.5937/fme2002404G [ESCI] [SCOPUS] *Q2*

47. Das, S., Ghadai, R.K., Krishna, A., Trivedi, A., Bhujel, R., Rai, S., Shivakoti, I., & Kalita, K. (2020). A Comparative Analysis of structural and Electrochemical properties of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO) synthesized by using Hummer's and Modified Hummer's Method. Iranian Journal of Materials Science and Engineering, 17(4), 25-32. DOI:10.22068/ijmse.17.4.3 [ESCI] [SCOPUS] *Q3*

46. Sherpa, T.D., Ghadai, R.K., Pradhan, B.B., & Kalita, K. (2020). Parametric experimental study on laser beam micro-grooving of Bakelite sheet. AIP Conference Proceedings, 2273 (1), 050076. DOI: 10.1063/5.0024845 [ESCI] [SCOPUS]

45. Vikram, K., Kalita, K., & Ghadai, R.K. (2020). Multi-Attribute Optimization of Diamond-like Carbon Thin Films. AIP Conference Proceedings, 2273 (1), 040010.DOI: 10.1063/5.0024626 [ESCI] [SCOPUS]

2019 (9 SCI & 9 SCOPUS) (Q1: 3, Q2: 4, Q3: 2)

44. Kalita, K., Dey, P., & Haldar, S. (2019). Search for accurate metamodels for structural engineering. Journal of Reinforced Plastics and Composites, 38(21-22), 995-1013. Sage Journals. DOI:10.1177/0731684419862346 *Impact Factor: 3.710* [SCOPUS] *Q1* [SCI]

43. Kalita, K., Dey, P., Joshi, M., & Haldar, S. (2019). Response Surface Modelling Approach for Multi-Objective Optimization of Composite Plates. Steel and Composite Structures,32(4), 455-466. Techno-press. DOI:10.12989/scs.2019.32.4.455 *Impact Factor: 5.733* [SCOPUS] *Q1* [SCI]

42. Ghadai, R.K., Kalita, K., Mondal, S.C., & Swain, B.P. (2019). Genetically Optimized Diamond-like carbon Thin Film Coatings. Materials and Manufacturing Processes, 34(13), 1476-1487. Taylor & Francis. DOI:10.1080/10426914.2019.1594273 *Impact Factor: 4.616* [SCOPUS] *Q1* [SCI]

41. Kalita, K., Dey, P., & Haldar, S. (2019). Robust Genetically-Optimized Skew Laminates. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(1), 146-159. Sage Journals. DOI: 10.1177/0954406218756943 *Impact Factor: 1.762* [SCOPUS] *Q2* [SCI]

40. Kalita, K., Ragavendran, U., Ramachandran, M., & Bhoi, A.K. (2019). Weighted Sum Multi-Objective Optimization of Skew Composite Laminates. Structural Engineering and Mechanics, 69(1), 021-031. Techno-press. DOI:10.12989/sem.2018.69.1.021 *Impact Factor: 3.524* [SCOPUS] *Q2* [SCI]

39. Haldar, S., Majumdar, A., Kalita, K. (2019). Bending Analysis of Composite Skew Cylindrical Shell Panel. Structural Engineering and Mechanics, 70(1), 125-131. Techno-press. DOI:10.12989/sem.2019.70.1.125 *Impact Factor: 3.524* [SCOPUS] *Q2* [SCI]

38. Ganesh, N., Joshi, M., Dutta, P., & Kalita, K. (2019). PSO-tuned Support Vector Machine Metamodels for Assessment of Turbulent Flows in Pipe Bends. Engineering Computations, 37(3), 981-1001. DOI:10.1108/EC-05-2019-0244 *Impact Factor: 1.593* [SCOPUS] *Q2* [SCI]

37. Haldar, S., Pal, S., Kalita, K. (2019). Free Vibration of Skew Laminates- a Brief Review and Some Benchmark Results. RINA Transactions Part A, International Journal of Maritime Engineering, 161 (A4), 357-380. DOI:10.3940/rina.ijme.2019.a4.540 *Impact Factor: 0.521* [SCOPUS] *Q3* [SCI]

36. Ragavendran, U., Ghadai, R.K., Bhoi, A.K., Ramachandran, M., & Kalita, K. (2019). Sensitivity Analysis and Optimization of EDM Process Parameters. Transactions of the Canadian Society for Mechanical Engineering, 43(1), 13-25. Canadian Science Publishing. DOI: 10.1139/tcsme-2018-0021 *Impact Factor: 1.450* [SCOPUS] *Q3* [SCI]

2018 (4 SCI & 6 SCOPUS) (Q1: 1, Q2: 3, Q3: 2)

35. Ghadai, R.K., Kalita, K., Mondal, S.C., & Swain, B.P. (2018). PECVD Process Parameter Optimization: Towards increased Hardness of Diamond-like Carbon Thin Films. Materials and Manufacturing Processes, 33(16), 1905-1913. Taylor & Francis. DOI:10.1080/10426914.2018.1512114 *Impact Factor: 4.616* [SCOPUS] *Q1* [SCI]

34. Kalita, K., Nasre, P., Dey, P., & Haldar, S. (2018). Metamodel Based Multi-Objective Design Optimization of Laminated Composite Plates. Structural Engineering and Mechanics, 67(3), 301-310. Techno-press. DOI:10.12989/sem.2018.67.3.301 *Impact Factor: 3.524* [SCOPUS] *Q2* [SCI]

33. Kalita, K., Mallick, P.K., Bhoi, A.K., & Ghadai, R.K (2018). Optimizing Drilling Induced Delamination in GFRP Composites using Genetic Algorithm & Particle Swarm Optimization. Advanced Composites Letters, 27(1), 1-9. Sage Journals. DOI:10.1177/096369351802700101 *Impact Factor: 0.852* [SCOPUS] *Q3* [SCI]

32. Tibadia, R., Patwardhan, K., Shah, D., Shinde, D., Chaudhari, R., & Kalita, K. (2018). Experimental Investigation on Hole Quality in Drilling of Composite Pipes. Transactions of the Canadian Society for Mechanical Engineering, 42(2), 147-155. Canadian Science Publishing. DOI: 10.1139/tcsme-2017-0045 *Impact Factor: 1.450* [SCOPUS] *Q3* [SCI]

31. Kalita, K., & Haldar, S. (2018). Natural Frequencies of Rectangular Plate With-and Without-Rotary Inertia. Journal of The Institution of Engineers (India): Series C, 99(5), 539-555. Springer. DOI: 10.1007/s40032-016-0327-9 [SCOPUS] *Q2*

30. Ghadai, R.K., Kalita, K., Guha, A., & Chakrabarti, S. (2018). A Numerical Simulation and Comparison of Cutting Fluid Flow Characteristics through Gradual Contraction and Sudden Contraction Nozzle. Journal of The Institution of Engineers (India): Series C, 99(4), 373-379. Springer. DOI: 10.1007/s40032-016-0316-z [SCOPUS] *Q2*

2017 (4 SCI & 8 SCOPUS) (Q1: 1, Q2: 3, Q3: 2)

29. Kalita, K., Shivakoti, I., & Ghadai, R.K. (2017). Optimizing process parameters for laser beam micro-marking using genetic algorithm and particle swarm optimization. Materials and Manufacturing Processes, 32(10), 1101-1108. Taylor & Francis. DOI: 10.1080/10426914.2017.1303156 *Impact Factor: 4.616* [SCOPUS] *Q1* [SCI]

28. Kalita, K., & Haldar, S. (2017). Eigen frequencies of Simply Supported Taper Plates with cut-outs. Structural Engineering and Mechanics, 63(1), 103-113. Techno-press. DOI: 10.12989/sem.2017.63.1.103 *Impact Factor: 3.524* [SCOPUS] *Q2* [SCI]

26. Chaudhari, R., Ingle, A., & Kalita, K. (2017). Tribological Investigation on Effect of Grain Size in 304 Austenitic Stainless Steel. Transactions of the Indian Institute of Metals, 70(9), 2399-2405. Springer. DOI:10.1007/s12666-017-1101-2 *Impact Factor: 1.499* [SCOPUS] *Q2* [SCI]

27. Shivakoti, I., Pradhan, B.B., Diyaley, S., Ghadai, R.K., & Kalita, K. (2017). Fuzzy-TOPSIS Based Selection of Laser Beam Micro Marking Process Parameters. Arabian Journal for Science and Engineering, 42(11), 4825-4831. Springer.DOI:10.1007/s13369-017-2673-1 *Impact Factor: 2.334* [SCOPUS] *Q2* [SCI]

25. Das, P.P., Gupta, P., Ghadai, R.K., Ramachandran, M., & Kalita, K. (2017). Optimization of Turning Process Parameters by Taguchi-Based Six Sigma. Mechanics and Mechanical Engineering, 21(3), 649-656. Techno-press.  https://www.kdm.p.lodz.pl/articles/2017/3/21_3_16.pdf [SCOPUS] *Q3*

24. Diyaley, S., Shilal, P., Shivakoti, I., Ghadai, R.K., & Kalita, K. (2017). PSI and TOPSIS Based Selection of Process Parameters in WEDM. Periodica Polytechnica Mechanical Engineering, 61(4), 255-260. Budapest University of Technology and Economics. DOI: 10.3311/PPme.10431 [SCOPUS] *Q3*

23. Jadvani, N., Dhiraj, V.S., Joshi, S., & Kalita, K. (2017). Non-Dimensional Stress Analysis of Orthotropic Laminates. Materials Focus, 6(1), 63-71. DOI:10.1166/mat.2017.1377 [ESCI]

22. Joshi, S., Jadvani, N., Shinde, D., & Kalita, K. (2017). SCF in Isotopic & Orthotropic Plates. Part II: Biaxial Load. Materials Today: Proceedings, 4(2), 2639-2644. Elsevier. DOI: 10.1016/j.matpr.2017.02.138 [ESCI] [SCOPUS]

21. Jadvani, N., Joshi, S., Shinde, D., & Kalita, K. (2017). SCF in Isotopic & Orthotropic Plates. Part I: Uniaxial Load. Materials Today: Proceedings, 4(2), 2632-2638. Elsevier. DOI: 10.1016/j.matpr.2017.02.137138 [ESCI] [SCOPUS]

2016 (1 SCI & 5 SCOPUS) (Q2: 1, Q3: 4)

20. Kalita, K., Ramachandran, M., Raichurkar, P., Mokal, S.D., & Haldar, S. (2016). Free Vibration Analysis of Laminated Composites by a Nine Node Iso-Parametric Plate Bending Element. Advanced Composites Letters, 25(5), 108-116. Sage Journals. DOI: 10.1177/096369351602500501 *Impact Factor: 0.852* [SCOPUS] *Q3* [SCI]

19. Kalita, K., & Haldar, S. (2016). Free vibration analysis of rectangular plates with central cutout. Cogent Engineering, 3(1), 1163781. Taylor & Francis. DOI: 10.1080/23311916.2016.1163781 [ESCI] [SCOPUS] *Q2*

18. Kalita, K., Shivakoti, I., Ghadai, R.K., & Haldar, S. (2016). Rotary Inertia Effect in Isotropic Plates Part I: Uniform Thickness. Romanian Journal of Acoustics and Vibration, 13(2), 68-74. https://www.sra.ro/vol13_no2_2016.html [ESCI] [SCOPUS] *Q3*

17. Kalita, K., Shivakoti, I., Ghadai, R.K., & Haldar, S. (2016). Rotary Inertia Effect in Isotropic Plates Part II: Taper Thickness. Romanian Journal of Acoustics and Vibration, 13(2), 75-80. https://www.sra.ro/vol13_no2_2016.html [ESCI] [SCOPUS] *Q3*

16. Behera, R.R., Ghadai, R.K., Kalita, K., & Banerjee, S. (2016). Simultaneous prediction of delamination and surface roughness in drilling GFRP composite using ANN. International Journal of Plastics Technology, 20(2), 424-450. Springer. DOI: 10.1007/s12588-016-9163-2 [ESCI] [SCOPUS] *Q3*

15. Chaudhari, R., Ingle, A., & Kalita, K. (2016). Experimental Investigation of Correlation of Grain Size and Mechanical Properties in 304 Stainless Steel. Materials Focus, 5(5), 440-445. DOI:10.1166/mat.2016.1334 [ESCI]

14. Dhiraj, V. S., Jadvani, N., & Kalita, K. (2016). Stress and strain analysis of functionally graded plates with circular cutout. Advances in Materials Research, 5(2), 81-92. DOI:10.12989/amr.2016.5.2.081 [ESCI]

13. Kumar, A., Agrawal, A., Ghadai, R.K., & Kalita, K. (2016). Analysis of Stress Concentration in Orthotropic Laminates. Procedia Technology, 23, 156-162. Elsevier. DOI:10.1016/j.protcy.2016.03.012 [ESCI]

2015 (8 SCOPUS) (Q3: 4)

12. Kalita, K., & Haldar, S. (2015). Parametric Study on Thick Plate Vibration Using FSDT. Mechanics and Mechanical Engineering, 19(2), 81-90. [SCOPUS] *Q3* https://www.kdm.p.lodz.pl/articles/2015/19_2_1KAL_HAL.pdf

11. Shinde, D., & Kalita, K. (2015). FE analysis of knuckle joint pin used in tractor trailer. ARPN Journal of Engineering and Applied Sciences, 10(5), 2227-2232. [SCOPUS] *Q3* https://www.arpnjournals.com/jeas/research_papers/rp_2015/jeas_0315_1747.pdf

10. Thirumump, M., Kalita, K., Ramachandran, M., & Ghadai, R.K. (2015). A numerical study of SCF convergence using ANSYS. ARPN Journal of Engineering and Applied Sciences, 10(5), 2233-2238. http://www.arpnjournals.com/jeas/research_papers/rp_2015/jeas_0315_1748.pdf [SCOPUS] *Q3*

9. Dutta, A., Kalita, K., & Shinde, D. (2015). Dynamic analysis of rotating composite cantilever blades with piezoelectric layers. ARPN Journal of Engineering and Applied Sciences, 10(5), 2252-2257. http://www.arpnjournals.com/jeas/research_papers/rp_2015/jeas_0315_1751.pdf [SCOPUS] *Q3*

8. Ghadai, R.K., Some, S., Diyaley, S., Das, S., & Kalita, K. (2015). On the Steady-State Performance Analysis of Finite Hydrodynamic Porous Journal Bearing Lubricated with Coupled Stress Fluid. International Journal of Applied Engineering Research, 10(11), 10497-10501. [SCOPUS] https://www.ripublication.com/Volume/ijaerv10n11spl.htm

7. Kalita, K., Shinde, D., & Haldar, S. (2015). Analysis of Transverse Bending of Rectangular Plate. Materials Today: Proceedings, 2(4-5), 2146-2154. Elsevier. DOI: 10.1016/j.matpr.2015.07.221 [ESCI] [SCOPUS]

6. Kalita, K., Shinde, D., & Thomas, T.T. (2015). Non-dimensional stress analysis of an orthotropic plate. Materials Today: Proceedings, 2(4-5), 3527-3533. Elsevier. DOI: 10.1016/j.matpr.2015.07.329 [ESCI] [SCOPUS]

5. Chaudhari, R., Ingle, A., & Kalita, K. (2015). Stress Analysis of Dissimilar Metal Weld between Carbon Steel and Stainless Steel formed by Transition Grading Technique. Materials Today: Proceedings, 2(4-5), 1657-1664. Elsevier. DOI: 10.1016/j.matpr.2015.07.093 [ESCI] [SCOPUS]

2014 (4 SCOPUS) (Q2:1)

4. Kalita, K., & Haldar, S. (2014). Static analysis of Transversely loaded Isotropic and Orthotropic plates with central cutout. Journal of the Institution of Engineers (India): Series C, 95(4), 347-358. Springer. DOI: 10.1007/s40032-014-0138-9 [SCOPUS] *Q2*

3. Ramachandran, M., & Kalita, K. (2014). Effect of coal ash as a filler on mechanical properties of glass fiber reinforced material. International Journal of Applied Engineering Research, 9(22), 14269-14277. https://www.ripublication.com/Volume/ijaerv9n22.htm [SCOPUS]

2. Deshpande, M., Kalita, K., & Ramachandran, M. (2014). Stress Mitigation in Isotropic Plates with Square Cutout using Auxiliary Holes. International Journal of Applied Engineering Research, 9(23), 21975-21992. https://www.ripublication.com/Volume/ijaerv9n23.htm [SCOPUS]

1. Bihari, A.K., Ramachandran, M., & Kalita, K. (2014). Disaster management on Ballast System in marine industry. International Journal of Oceans and Oceanography, 8(2), 127-135. https://www.ripublication.com/Volume/ijoov8n2.htm [SCOPUS]

1. S. Paul, K. Kalita, A. Dutta, S. Haldar. "Static Analysis of Rectangular Plate with Internal Cut-Out Using FEM", INCAM-2013, IIT Chennai, 4-6 July, 2013. 
   
2. K. Kalita, A. Dutta. "Free Vibration Analysis of Isotropic and Composite plate", AMAAE-2013, JNU, New Delhi, 21-22 Sept., 2013. 
3. K. Kalita, A. K. Banerjee, S. Haldar. "An Analysis to Mitigate Induced Principal Stresses in Orthotropic Plates", AMAAE-2013, Jawaharlal Nehru University, New Delhi, 21-22 Sept., 2013. 
4. K. Kalita, A. K. Banerjee. "Static Analysis of Isotropic and Orthotropic Plates with Central Cutouts under Transverse Loading", NCRAME-2013, ISBN: 978-93-82880-71-4, NERIST, Nirjuli, 8-9, Nov, 2013. 
5. K. Kalita, A. Dutta, S. Haldar. "Stress Concentration Factor Convergence Study of a Thin Plate", 58th Congress of ISTAM-2013, IIT Kharagpur at BESU, Howrah, 18-21 Dec, 2013. 
6. K. Kalita, S. Haldar. "Stress Analysis of Cutout Plate", 58th Congress of ISTAM-2013, IIT Kharagpur at BESU, Howrah, 18-21 Dec, 2013. 
7. K. Kalita, S. P. Tamang. "Design and Development of a Pipe Crawling Robot", ICMES-2014, Chitkara University, Chandigarh, 20-22 March, 2014. 
8. K. Kalita, A. K. Banerjee. "Static Analysis of Isotropic & Orthotropic Plates with Central Cutout Subjected to Equi-Biaxial Loading", ICMES-2014, Chitkara University, Chandigarh, 20-22 March, 2014.
9. K. Kalita, S. Haldar. "Natural frequencies of clamped taper rectangular plates," AMETI-2014, NERIST, Nirjuli.
10. K. Kalita, S. Haldar. "Effect of rotary inertia on fundamental frequencies of rectangular plate," ICTACEM-2014, IIT Kharagpur.
11. M. Deshpande, R. Gandhi, K. Kalita, Ramachandran. M, A. Dutta. "A Numerical Study on the Problem of Stress Concentration in Steel Plate," AMPD-2015, NIT Surat.
12. P. Chincholikar, A. Commessariat, K. Kalita, Ramachandran. M, S. Sapre. "Steel plate under Equi-biaxial loading," AMPD-2015, NIT Surat.
13. M. Bhalla, H. Srivastava, Ramachandran. M, K. Kalita. "Analysis of Mechanical Properties of reinforced plastic material composites with natural palm fiber," ICRIET-2015.
14. S. Shah, A. Patil, Ramachandran. M, K. Kalita. "Mechanical properties of Hybrid carbon and glass Fiber Reinforced Plastic," ICRIET-2015.
15. J. Pandey, S. Gulia, Ramachandran. M, K. Kalita. "Comparison of jute fiber over glass fiber and carbon fiber reinforced plastic material composites used for civil structure," ICRIET-2015.
16. K. Kalita., P. Nashre, P. Dey, S. Haldar. "Response Surface based Metamodelling- Numerical experiments on Noisy dataset," ICMMRE-2017.